Факультет Електроніки, автоматизації та метрології
Permanent URI for this community
Browse
Browsing Факультет Електроніки, автоматизації та метрології by Issue Date
Now showing 1 - 20 of 29
Results Per Page
Sort Options
Item ФАКТОРИ, ЩО ВИЗНАЧАЮТЬ ЕФЕКТИВНІСТЬ СВІТЛОВИПРОМІНЮЮЧИХ ДІОДІВ(ОНАЗ імені О. С. Попова, 2019) Ірха В. І.; Irkha V.; Марколенко П. Ю.; Markolenko P.Досліджувались фактори, що визначають ефективність світловипромінюючих діодів. Показано, що вона визначається співвідношенням між інтенсивностями випромінювальної та безвипромінювальної рекомбінації носіїв заряду, яка залежить від зонної структури напівпровідника та концентрації різноманітних домішок у них. Вивчається роль глибоких рівнів в ефективності електролюмінесценції.Item ГЛИБОКІ РІВНІ В P-N-СТРУКТУРАХ(ОНАЗ імені О. С. Попова, 2019) Ірха В. І.; Irkha V.; Марколенко П. Ю.; Markolenko P.; Овдій А. В.; Ovdii A.Досліджувались глибокі рівні в p-n-структурах на основі твердого розчину GaAsP. Знайдено, що розкид ефективності досліджуваних світлодіодів (СВД) обумовлений різноманітністю складу GaAsP в активній області. Визначено, що ефективність роботи СВД пов’язана з глибокими рівнями, обумовленими різного виду дефектами. Знайдені енергії іонізації ряду глибоких рівнів у збідненому шарі p-n-переходів. Їх існування може привести до збільшення послідовного опору СВД, що в свою чергу призведе до додаткового його розігріву та зниження к.к.д.Item МЕТОДИ ЗБІЛЬШЕННЯ ШВИДКОСТІ ПЕРЕДАЧІ ІНФОРМАЦІЇ В ОПТИЧНОМУ ВОЛОКНІ(ОНАЗ імені О. С. Попова, 2019) Ірха В. І.; Irkha V.; Слободянюк І. А.; Slobodianiuk А.; Марколенко Т. Д.; Markolenko T.Розглядається вплив різних видів дисперсії на швидкість передачі та об’єм інформації по оптичному волокну. Показується вплив дисперсії на деградацію чутливості приймача. Досліджується поляризаційна модова дисперсія, як один із обмежуючих факторів при передаванні інформації з великою швидкістю. Показані можливості її компенсації.Item ОСОБЛИВОСТІ ПОБУДОВИ СИСТЕМ АВТОМАТИЧНОГО УПРАВЛІННЯ НА МІКРОПРОЦЕСОРАХ(ОНАЗ імені О. С. Попова, 2019) Воробйова О. М.; Vorobiova O.; Флейта Ю. В.; Fleita Y.Розглянуто особливості використання засобів обчислювальної техніки в системах автоматичного управління технологічними процесами.Item TECHNOLOGICAL COMPLEX OF TECHNICAL NON-RESTORABLE OBJECT(Barca Academy Publishing, 2020) Банзак Г. В.; Banzak H.; Банзак О. В.; Banzak O.; Лещенко О. І.; Leshchenko O.Sophisticated technical objects in modern society are extremely important. This is primarily about various military and special-purpose radio electronic complexes, radar stations, automated control systems (air traffic, energy facilities, etc.). The state of defense of the state, economic security, and the lives of hundreds and thousands of people depend on the level of reliability of such facilities.Item СИНТЕЗ КОРИГУВАЛЬНИХ ПРИСТРОЇВ СИСТЕМ АВТОМАТИЧНОГО УПРАВЛІННЯ(ОНАЗ імені О. С. Попова, 2020) Флейта Ю. В.; Fleita Y.; Смірнова Е. С.; Smirnova E.Розглянуто оптимальний синтез коригувальних пристроїв систем автоматичного управління.Item ІНФОКОМУНІКАЦІЙНІ ПОСЛУГИ У НАВЧАЛЬНОМУ ПРОЦЕСІ(ОНАЗ імені О. С. Попова, 2020) Флейта Ю. В.; Fleita Y.Розглянуто можливості використання інфокомунікаційних послуг для підвищення якості навчального процесу.Item ДОСЛІДЖЕННЯ ГЛИБОКИХ РІВНІВ В P-N-СТРУКТУРАХ МЕТОДОМ ТЕРМОСТИМУЛЬОВАНИХ СТРУМІВ(ОНАЗ імені О. С. Попова, 2020) Ірха В. І.; Irkha V.; Марколенко Т. Д.; Markolenko T.Досліджувалось існування глибоких рівнів в p-n-структурах методом термостимульованих струмів. Описується методика їх отримування. Показується, що ефективність електролюмінісценції пов’язана із існуванням таких рівнів.Item ДОСЛІДЖЕННЯ ДОМІШКОВИХ ЦЕНТРІВ У СВІТЛОДІОДАХ МЕТОДОМ ТЕРМОСТИМУЛЬОВАНИХ СТРУМІВ(ОНАЗ імені О. С. Попова, 2020) Ірха В. І.; Irkha V.; Юр'єва О. В.; Yurieva O.Досліджувались домішкові центри у світлодіодах (СВД) на основі GaAlAs для волоконно-оптичних ліній зв’язку методом термостимульованих струмів (ТСС). Вияснялись причини їх деградації. Знайдемо зв’язок в процесі деградації СВД із ростом концентрації домішкових центрів. З допомогою кривих ТСС визначено їх концентрації до та після деградації СВД. Показано вплив домішкових центрів на ефективність електролюмінісценції СВД.Item ОЦІНКИ ПАРАМЕТРІВ ПОШКОДЖЕНЬ В ПРОВІДНИКОВИХ ЛІНІЯХ(Державний університет інтелектуальних технологій і зв'язку ; Крок, 2021) Ірха В. І.; Irkha V.; Слободянюк І. А.; Slobodianiuk I.Розглядається питання контролю стану в провідникових лініях різними методами при різноманітних їх пошкодженнях. Показані різноманітні типи пошкоджень та способи їх знаходження. Проводиться оцінка відомих методів контролю та захисту інформації. The question of control of a condition in conducting lines by various methods at their various damages is considered. Various types of damages and ways of their finding are shown. The assessment of known methods of control and protection of information is carried out.Item ТЕОРЕТИКО-МЕТОДОЛОГІЧНІ ЗАСАДИ ЕКСПЕРТИЗИ ОСВІТНЬОГО ПРОЦЕСУ ЗАКЛАДУ ВИЩОЇ ОСВІТИ(Державний університет інтелектуальних технологій і зв'язку, 2022) Кисельова О. І.; Kyselova O.; Коломієць Л. В.; Kolomiiets L.; Передерко А. Л.; Perederko A.; Грабовський О. В.; Hrabovskyi О.У статті визначено основні теоретико-методологічні засади експертизи освітнього процесу закладу вищої освіти, узагальнено характеристики експертизи, класифіковано об’єкти і процеси приналежні освітньому процесу ЗВО, що підлягають експертному вивченню. Досліджено ряд загальнонаукових методологічних підходів, функцій та методів експертизи освітнього процесу, проаналізовано їхню ефективність та доцільність застосування в умовах освітнього процесу ЗВО. Доведено що, науково-методологічне обґрунтування впровадження технологій педагогічної експертизи засновано на зведені в єдину матрицю різних показників змісту освітньої діяльності ЗВО: змісту освіти, освітніх, розвиваючих і виховних цілей; аналізу освітніх ситуацій, методів, засобів, форм навчання і контролю; врахування зворотного і міждисциплінарних зв’язків; інтелектуального розвитку студентів; компетентності викладачів; інноваційності, полікомпонентності та професійної спрямованості навчання в ЗВО. The article defines the main theoretical and methodological foundations of the examination of the educational process of the university, it belongs to the cluster of humanitarian examinations - this is a kind of pedagogical examination, which consists of a number of procedures necessary for the creation and subsequent implementation of the results covered in the collective conclusion, expert assessment (or judgment) about the object under study (pedagogical object, phenomenon or process). The characteristics of pedagogical expertise, which are inherent not only to it, but also to other scientific methods of research, for example, objectivity, criticality, compliance of the assessed object with legislative norms, that is, they do not determine the essence of the method of pedagogical expertise, in contrast to such as: requirements, collectivity, predictability to experts. These are properties, the totality of which describes the essence of expertise as a scientific method. The objects of pedagogical expertise are conditionally divided into two categories: objects of the first order: the activities of the university, didactic research, the quality of education - these are generalized categories that combine objects of the second order (for example, the quality of education is determined by assessing students’ knowledge, building their professiograms, using pedagogical technologies and methods etc., examinations of objects of the second order can be carried out at the same time. The functions of the examination of the educational process characterize it as an examination of the humanitarian direction and at the same time combine it with other methods of socially oriented and person-centered research. is based on various indicators of the content of the educational activities of the university, summarized in a single matrix: the content of education, educational, developmental and educational goals; analysis of educational situations, methods, means, forms of education and control; accounting for feedback and interdisciplinary links; intellectual development of students; competence of teachers; innovativeness, multicomponent and professional orientation of education at the university.Item ПЛІВКОВА КОНДЕНСАЦІЯ У СЕРЕДИНІ ГОРИЗОНТАЛЬНИХ ТРУБ ТА МІНІКАНАЛІВ(Державний університет інтелектуальних технологій і зв'язку, 2022) Горін В. В.; Horin V.; Коломієць Л. В.; Kolomiiets L.; Середа В. В.; Sereda V.У праці наведено короткий опис напівемпіричної моделі Ананьєва, Бойко і Кружиліна щодо розрахунку тепловіддачі під час конденсації робочих речовин у середині гладких горизонтальних труб у разі турбулентного режиму течії потоку. Представлено порівняння розрахунків тепловіддачі за напівемпіричною моделлю з результатами експериментальних досліджень щодо конденсації холодоагентів, гідрокарбонів та спеціалізованих речовин у середині труб із відомих праць різних авторів, які свідчать про добре узгодження результатів досліджень із розрахунками за зазначеною моделлю із урахуванням їх граничних величин. The article provides a brief description of the semi-empirical model of Ananiev, Boyko and Kruzhilin for calculating heat transfer during the condensation of working substances inside smooth horizontal pipes in a turbulent flow regime. Comparisons of heat transfer calculations based on a semi-empirical model with the results of experimental studies during the condensation of refrigerants, hydrocarbons and specialized substances inside pipes from well-known works by different authors are presented, which indicate good agreement between the results of studies and calculations based on the model, taking into account their boundary values. The presented calculations of heat transfer during condensation inside smooth horizontal pipes and minichannels are performed according to the semiempirical formula of Ananiev, Boyko and Kruzhilin, taking into account the influence of steam velocity on heat transfer processes. The calculation results demonstrate good agreement with the experimental data of various authors on the condensation of refrigerants R22, R134a, R125, R32 , R410A, specialized substances R245fa, Novec649, HFE-7000 and natural hydrocarbons R290, R600a, R1270, and DME for turbulent flow areas. For engineering practice, the presented semi-empirical model for calculating heat transfer during condensation of water vapor, refrigerants R22, R134a, R32, R410A, specialized substance HFE-7000, natural hydrocarbons R290, R600a, R1270 for smooth horizontal pipes (din > 3 mm) can be recommended. In this case, it is necessary to take into account the limits of application of the boundary values of the model. Calculation of heat transfer coefficients by semi-empirical correlation shows that it improves the description of the experimental data of many authors of works on the condensation of refrigerants R152a, R290, R134a, and R32 inside round minichannels (3 mm ≥ din > 200 μm) under turbulent and transient flow regimes. Further studies should include the performance of calculations on theoretical and empirical models for calculating heat transfer during condensation inside minichannels in order to create a general method for calculating heat transfer, taking into account the influence of regime flow parameters.Item АНАЛІЗ МЕТОДІВ ВЕЙВЛЕТ-ПЕРЕТВОРЕНЬ В ЗАДАЧАХ СТИСНЕННЯ ЗОБРАЖЕНЬ(Державний університет інтелектуальних технологій і зв'язку, 2022) Солодка В. І.; Solodka V.; Тимошевський О. В.; Tymoshevskyi O.В роботі проводиться аналіз за допомогою спектральних перетворень для отримання показників стиснення та відношення сигнал/шум, найкращим вейвлет базисом, а саме окремий випадок перетворення Фур’є для стиснення зображень за значенням відношення сигнал/шум. Також проводиться проектування сіткового об’ємного об’єкта в двовимірні координати, для видалення невидимих вершини і відрізків. Показано, що з метою зменшення потоку даних доцільно перед перетворенням тривимірного сіткового зображення в двовимірне проводити спектральне вейвлет-перетворення. При видаленні незначних вейвлет-коефіцієнтів можливо досягти стиснення в 5 разів, при цьому якість зображення, представлене ставленням сигнал/шум, досягає значення 35 дБ – оцінка показника прийнятного візуальної якості для комфортного перегляду. In this work, an analysis is carried out using spectral transformations to obtain compression indicators and signal-to-noise ratio, the best wavelet basis, namely, a special case of the Fourier transform for image compression according to the signal-to-noise ratio criteria. The increase in the compression ratio with increasing Dobeshi order is shown due to the fact that increasing the order increases the scaling function, which allows to increase the degree of compression of the image, obtaining a satisfactory quality of this image. But with increasing scaling function, the length of the filter increases, which complicates the implementation of this method. Spectral transformations in the problems of image compression in modern algorithms are shown that they can increase the compression ratio of black and white and color images with a comparative visual quality in relation to the algorithms of the previous generation, based on discrete cosine transform. Also, the design of a mesh volumetric object in two-dimensional coordinates is carried out to remove invisible vertices and segments. A study of the transfer of the remainder in the two-dimensional field of vertices during alternation and sequential television scans. It is shown that in order to reduce the data flow, it is advisable to perform a spectral wavelet transform before transforming a three-dimensional grid image into a twodimensional one. By removing insignificant values of the wavelet coefficients, it is possible to achieve compression by a factor of 5, while the image quality represented by the signal-to-noise ratio reaches 35 dB – an estimate of the indicator of acceptable visual quality for comfortable viewing.Item KINETICS OF DESTRUCTION AT THE SURFACE STRENGTHENING OF MACHINE PARTS(Державний університет інтелектуальних технологій і зв'язку, 2023) Коломієць Л. В.; Kolomiiets L.; Лимаренко О. М.; Lymarenko O.; Балтянський І. В.; Baltianskyi I.; Левендюк О. В.; Levendiuk O.Studying the influence of various factors on the strengthening effect and the kinetics of destruction of surface-hardened parts under cyclic loading is important for strength and durability calculations. A curve is indicated that characterizes the distribution of residual stresses after surface hardening of a part. The diagrams obtained in the work were constructed as a result of algebraic summation of the original diagrams. The analysis performed makes it possible to explain the nature of the crack occurrence: a crack nucleates under certain conditions under a surface-hardened layer in the core material of the part in a halfcycle of tensile stresses from an external load. The research was carried out on samples made of steel 45 with a boron-chromed diffusion layer obtained by successively saturating the surface with boron and chromium. Широке впровадження в практику прогресивних методів розрахунку несучої здатності та технологічних процесів поверхневого зміцнення деталей дозволяє підвищити їх ресурс при одночасному зниженні матеріалоємності. Вивчення впливу різних факторів на ефект зміцнення та кінетику руйнування поверхнево зміцнених деталей при циклічному навантаженні має важливе значення для розрахункових оцінок міцності та довговічності. Виконані у цьому напрямі роботи показали, що труднощі, які виникають при розрахунку меж витривалості поверхнево зміцнених деталей, пов'язані з роллю залишкових напружень наявністю концентраторів, градієнта напруги в концентраторі і неоднорідністю напружень. Наявність залишкового напруження і напруження, викликаного зовнішнім навантаженням, визначає напружено-деформований стан матеріалу при циклічних навантаженнях деталей. Показано, що науковцями недостатньо уваги приділено питанням дослідження процесу зародження втомних тріщин під поверхнево зміцненим шаром. Розглянуто випадок циклічного навантаження згинанням поверхнево зміцненої круглої деталі з концентратором напружень. Вказано криву, що характеризує розподіл залишкових напружень після поверхневого зміцнення деталі, характер зміни яких наступний: стискають – в поверхневому шарі заданої товщини і розтягують – в серцевині матеріалу деталі (внутрішніх шарах). Отримані в роботі епюри побудовані в результаті алгебраїчного підсумовування вихідних епюр. Операція підсумовування носить формальний характер і виконана тільки для того, щоб уявити загальний характер картини напружено деформованого стану в досліджених областях деталі. Проведений аналіз дозволяє пояснити характер виникнення тріщини: тріщина зароджується за певних умов під поверхнево зміцненим шаром у матеріалі серцевини деталі в напівциклі напружень, що розтягують, від зовнішнього навантаження. Особливий інтерес для практики представляють відомості про розвиток тріщини при циклічному навантаженні поверхнево зміцненої деталі як малоциклової, так і багатоциклової втоми.Item ВИКОРИСТАННЯ ЦИФРОВИХ ТЕХНОЛОГІЙ В ЛОГІСТИЧНИХ СИСТЕМАХ(Державний університет інтелектуальних технологій і зв'язку, 2023) Похлебіна Т. І.; Pokhlebina Т.; Лимаренко Ю. Л.; Lymarenko Y.; Урсуленко В. В.; Ursulenko V.У статті розглядаються питання, пов’язані з вантажними перевезеннями автотранспортом і їх місце в логістичній системі. На основі проведеного аналізу виявлена необхідність вдосконалення процесу з використанням ITS-технологій. Представлені варіанти використання технологій автоматичної ідентифікації в транспортно-логістичних системах та основні показники ефективності цієї технології. Досліджено процес застосування автоматичної ідентифікації на кожній ділянці ланцюга постачань. Розроблені правила роботи учасників ланцюга постачань з використанням радіочастотної ідентифікації та надані рекомендації до зондувального сигналу. The article examines issues related to road freight transportation and their place in the overall logistics system. The role of the transport and logistics system is determined not only by its economic indicators, but also by its ability to influence other types of activity. At the same time, a considerable list of problems was formed in the transport and logistics system, without the solution of which the effective functioning of business entities is impossible. Based on the analysis of the current situation in the economy and the conditions of application of the modern logistics system, the need to improve the logistics process using IT technologies was revealed. For the more effective development of such branches of the economy as industry and trade, the authors of the article provide possible options for using automatic identification technologies in transport and logistics systems in order to increase the efficiency of road transport and the main indicators of the efficiency of the entire technological process. The process of applying automatic identification was also considered and recommendations were given taking into account the specifics of their application at each link of the supply chain (production, road transport, warehouse or trading company). In connection with the acute need for typical technological solutions and the lack of uniform standards, the Rules for the work of participants in the supply chain using radio frequency identification have been developed. The classification and recommendations of sounding the signal of the hundredth level when using radio frequency identification are given. In addition, recommendations for the use and configuration of RFID transponders are presented depending on the properties of the cargo, the size of the cargo unit and the way they are stacked. The article briefly presents the possible advantages of improving the functioning of road freight transport in logistics systems using automatic identification.Item TWO-GYROSCOPIC SENSITIVE ELEMENT OF THE STABILIZATION COMPLEX(Державний університет інтелектуальних технологій і зв'язку, 2023) Безвесільна О. М.; Bezvesilna О.; Коломієць Л. В.; Kolomiiets L.; Киричук Ю. В.; Kyrychuk Y.; Толочко Т. О.; Tolochko T.The proposed two-gyroscopic SE is designed to measure acceleration and belongs to the area of acceleration measurements on a moving base and can be used in stabilization systems. The purpose of the article is to increase the accuracy of acceleration determination. To do this, it is necessary to eliminate methodical errors of gyroscopic moments-obstacle from the cross angular velocities of the base and from the angular velocity of the Earth's rotation. The proposed two-gyro SE consists of a three-stage gyroscope located in the inner and outer frames, equipped with an inter-frame correction system, which includes an angle sensor located on the axis of the inner frame of the gyroscope, the output of which is connected to a moment sensor located on the axis of the outer frame. What is new in the two-gyro SE stabilizer is the application on the axis of the inner frame of the gyroscope with the possibility of rotating the rotor in the opposite direction of the main gyroscope, equipped with an inter frame correction system, which includes an electric angle sensor located on the axis of the inner frame of the gyroscope, to the output of which the control winding of the electric moment sensor is connected. Located on the axis of the outer frame, and both gyroscopes are equipped with two additional angle sensors located on the axes of the outer frames, the outputs of which are connected to two additional moment sensors located on one axis of the inner frame, the centers of gravity of the two three-stage gyroscopes are equally shifted to one side along the axes of rotation gyroscope rotors relative to the axes of the outer frames. Пропонований двогіроскопічний чутливий елемент призначений для вимірювання прискорення та відноситься до області вимірювань прискорення на рухомій основі і може використовуватися в системах стабілізації. Метою статті є підвищення точності визначення прискорення. Для цього необхідно усунути методичні похибки гіроскопічних моментів – перешкод від поперечних кутових швидкостей основи і від кутової швидкості обертання Землі. Чутливий елемент складається з триступінчастого гіроскопа, розташованого у внутрішній і зовнішній рамах, оснащеного системою міжрамкової корекції, яка включає датчик кута розташований на осі внутрішньої рами гіроскопа, вихід якого підключений до розташованого на осі зовнішньої рами датчика моменту. Новим у конструкції чутливого елементу комплексу стабілізації є застосування на осі внутрішньої рами гіроскопа з можливістю обертання ротора в протилежну сторону основного гіроскопа, оснащеного системою міжрамкової корекції, яка включає в себе електричний датчик кута розташований на осі внутрішньої рами гіроскопа, до виходу якого підключена керуюча обмотка датчика електричного моменту, розташованого на осі зовнішньої рами, а обидва гіроскопи оснащені двома додатковими датчиками кута розташовані на осях зовнішніх рамок, виходи яких з’єднані з двома додатковими датчиками моменту, розташованими на одній осі внутрішньої рамки, центри ваги двох триступеневих гіроскопів однаково зміщені в одну сторону по осях обертання роторів гіроскопа відносно осей зовнішніх рам. Застосування двогіроскопічного чутливого елементу забезпечує більш високу точність вимірювань, на відміну від одногіроскопічного, за рахунок компенсації похибок поперечних кутових швидкостей і кутової швидкості обертання Землі.Item PROBLEM ISSUES OF THE DEVELOPMENT OF NUCLEAR ENERGY(Державний університет інтелектуальних технологій і зв'язку, 2023) Сичов М. І.; Sychov M.; Коломієць Л. В.; Kolomiiets L.The energy system of Ukraine includes power transmission lines of various capacities and generating facilities, the most complex of which are nuclear power plants. The article examines aspects of the development of nuclear energy under the circumstances that have developed in Ukraine today. Ukraine has the largest reserves of uranium ores in Europe and suitable conditions for their use. Currently, the production volumes of fuel for nuclear power plants are insufficient for their development; we do not have our own production of heat-separating elements. In addition, the military industry of Ukraine needs new types of weapons and modern materials based on substances from the enrichment of uranium ore. Україна має потужну та розвинену енергетичну систему. Вона включає в себе лінії електропередачі з розподільними пристроями різної потужності. Другою її складовою є генеруючі потужності (теплоелектростанції, гідро- та акумулюючі станції, вітрові та сонячні станції, атомні електростанції). Атомна енергетика, незважаючи на низку значних аварій у світі, є найбільш надійною, безпечною та економічно вигідною. Найкращі екологічні показники, в тому числі за викидами в атмосферу, мають якраз атомні електростанції. Проблема їх функціонування полягає у розгляді подальших аспектів розвитку атомної енергетики в умовах, що сьогодні склалися в Україні та видобутку сировини. Україна має достатні запаси уранових руд та металів для атомної енергетики, а умови їх залягання придатні та зручні для їх використання. Технологія переробки уранових руд в Україні заснована на вилуговуванні урану з гірської породи, що відбувається під землею, в надійних геологічних умовах. Сьогодні обсяги видобутку та збагачення уранової руди та виробництва палива для атомних електростанцій недостатні для їх розвитку та будівництва нових реакторів. Поки що Україна не має власного виробництва ТВЕЛів, які зараз імпортуються з США. Також залишаються екологічні проблеми при видобутку та переробці уранової руди, проблеми зі зберіганням відходів атомної промисловості. В українському суспільстві і досі існує стереотип заперечення атомної енергетики, який породила низку катастроф (Чорнобиль, Фукусіма та інші). Населення України досі не отримує достатньої інформації про ядерні технології, їх безпеку та переваги. Крім того, військові дії вимагають нових видів зброї, яких раніше в Україні не було, на основі речовин, які отримують під час збагачення уранової руди.Item ВИЗНАЧЕННЯ НАПРУЖЕНО-ДЕФОРМІВНОГО СТАНУ ПРУЖНИХ ЕЛЕМЕНТІВ ТЕНЗОМЕТРИЧНИХ ДАТЧИКІВ СИЛИ(Державний університет інтелектуальних технологій і зв'язку, 2023) Коломієць Л. В.; Kolomiiets L.; Лимаренко О. М.; Lymarenko O.; Передерко А. Л.; Perederko A.; Цимбалюк А. Г.; Tsymbaliuk A.; Цимбалюк Д. А.; Tsymbaliuk D.У статті показано, що при вимірюванні зусиль ваговими пристроями у тривалих динамічних процесах особливе значення набуває збереження метрологічних параметрів тензорезисторних датчиків сили в певному часовому інтервалі. Силовимірювальні ланцюги вагових пристроїв виконують таким чином, щоб пружний елемент працював у зоні пружних деформацій. Існування різноманітних форм пружних елементів викликає математичні труднощі під час вирішення відповідних задач теорії пружності. При цьому урахування динамічних доданків зовнішніх впливів на пружний елемент значно ускладнює процес побудови розв’язку. Як показав аналіз досліджень і відомих публікацій, вкрай необхідним для визначення напружено-деформівного стану пружних елементів є застосування одного із ефективних видів чисельних методів розрахунку – методу скінченних елементів, який є основою скінченно-елементного пакета ANSYS та дозволяє проєктувати конструкції силомірних пристроїв при зміні навантажень в широкому діапазоні. The article shows that when measuring forces with weighing devices in long-term dynamic processes, the preservation of metrological parameters of tensor-resistor force sensors in a certain time interval acquires special importance. The causes of similar failures of force sensors can be fatigue phenomena occurring in the material of the elastic element. Functional failure associated with fatigue phenomena of the material of the elastic element is usually observed long before its complete destruction. Therefore, force-measuring chains of weighing devices are made in such a way that the elastic element works in the zone of elastic deformations. This is also explained by the fact that in the presence of plastic deformations, hysteresis phenomena appear which reduces the accuracy of measurements. The existence of various forms of elastic elements causes mathematical difficulties when solving the corresponding problems of the theory of elasticity. At the same time, accounting for the dynamic terms of external influences on the elastic element significantly complicates the process of constructing a solution. Without taking into account dynamic components, it is difficult to perform optimal design of elastic elements of force sensors of weighing systems. As the analysis of research and well-known publications showed, it is absolutely necessary to determine the stress-strain state of elastic elements using one of the effective types of numerical calculation methods – the finite element method, which is the basis of the ANSYS finite element package and allows designing the structures of force measuring devices when loads change in a wide range. The analysis of the results of the research of the VAT of the elastic element of the cylindrical force sensor with cutouts shows that the location of the tensor resistors at the minimum distance to the axis of symmetry of the elastic element, in the zone of maximum deformations, is optimally chosen, which allows to reduce the influence of negative factors on the accuracy and stability of the measurement results.Item ЕКСПЕРТИЗА ОСВІТНІХ ТЕХНОЛОГІЙ У ТЕХНІЧНОМУ ЗАКЛАДІ ВИЩОЇ ОСВІТИ(Державний університет інтелектуальних технологій і зв'язку, 2023) Кисельова О. І.; Kyselova O.; Коломієць Л. В.; Kolomiiets L.; Грабовський О. В.; Hrabovskyi O.У статті визначено зміст освітньої технології та її ознаки; сутність експертизи освітньої технології впроваджуваної в сучасному технічному ЗВО, етапи та критерії її проведення. Представлено процедуру експертизи освітніх технологій у технічному закладі вищої освіти, перший етап якої передбачав опитування учасників освітнього процесу, за розробленим опитувальником для оцінки придатності та ефективності застосовуваних технологій (дослідження проводилось в Державному університеті інтелектуальних технологій і зв’язку); за результатами опитування студентів і викладачів визначено, що респонденти розглядають освітню технологію, яка передбачає змішану форму навчання, як вимогу часу, спричинену зовнішніми впливами, переважна більшість опитаних вважають її досить ефективною і сучасною, але такою, яка не спроможна повністю забезпечити всі запити учасників освітнього процесу та потребує певних удосконалень. The article defines the content of educational technology and its features; the essence of the examination of educational technology implemented in modern technical higher education institutions, the stages and criteria of its implementation. The analyzed educational technology involves the use of technical means and programmed learning, is a tool for improving the organization of the educational process, is focused on the modernization of educational activities, in accordance with the demands of society. The procedure for determining the effectiveness of educational technology is presented, which is based on the measurement of the time spent and the calculation of the productivity coefficient, which relates the acquired professional competences to the speed of work performance. The procedure of examination of educational technologies in a technical institution of higher education is presented, the first stage of which involved surveying the participants of the educational process according to a developed questionnaire to assess the suitability and effectiveness of the technology used (the study was conducted at the State University of Intellectual Technologies and Communication). Respondents were asked questions about the relevance, efficiency, quality assurance of the educational process, its effectiveness, the formation of a "resource of success" and the competitiveness of graduates. According to the results of the survey of students and teachers, it was determined that they consider educational technology, which involves a mixed form of learning, as a time requirement caused by external influences, the vast majority of respondents consider it quite effective and modern, but not able to fully satisfy all the requests of participants in the educational process, in in the future, it needs certain improvements.Item МОДЕЛЬ УНІВЕРСАЛЬНОЇ ЛАБОРАТОРНОЇ УСТАНОВКИ ДОСЛІДЖЕННЯ ПАРАМЕТРІВ ЕЛЕКТРОННИХ ПРИЛАДІВ ТА СИСТЕМ(Національний університет "Чернігівська політехніка", 2024) Кудряшов В. О.; Kudriashov V.; Любимов А. Я.; Liubymov A.; Лещенко О. І.; Leshchenko O.; Добровольська С. В.; Dobrovolska S,; Кисельова О. І.; Kyselova O.У статті розкриваються характеристики, призначення та принцип дії розробленої моделі універсальної лабораторної установки дослідження параметрів і характеристик електронних приладів, пристроїв та систем, з забезпеченням можливості роботи установки з комп’ютерним та програмним забезпеченням. Установка може використовуватися замість декількох вимірювальних приладів, що дозволяє більш якісно виконувати дослідження. Її елементи дозволяють інтегрувати їх зв’язок за допомогою інтерфейсу та оптимізувати процес дослідження шляхом використання необхідного програмного забезпечення; фізичні вимірювання параметрів і характеристик моделей електронних пристроїв та систем проводяться за допомогою програмного забезпечення, наприклад, на базі програми схемотехнічного моделювання «MULTISIM». Urgency of the research. At the current stage of development of science, technology and information technologies, electronic devices, devices and systems are the basis of automation of technological processes of production and are effectively used in all its spheres. On the basis of integrated technologies, devices for automation of production, individual nodes and processes, measuring equipment, analog-digital and digital-analog converters, etc. are created. Target setting. There was a need to create an installation that would ensure the integration of the possibilities of virtual and physical research of the parameters and characteristics of electronic devices, devices and systems in laboratory conditions, with the possibility of conducting research and analyzing their results both physically and virtually. The research objective: to reveal the characteristics, purpose and principle of operation of the developed model of a universal laboratory installation for the study of parameters and characteristics of electronic devices, devices and systems, ensuring the possibility of operation of the installation with computer and software. The statement of basic material. The article describes the characteristics, purpose and principle of operation of the developed model of a universal laboratory installation for the study of parameters and characteristics of electronic devices, devices and systems, with the provision of the possibility of operation of the installation with computer and software. The installation can successfully replace several measuring devices, which allows for better quality research. Its elements allow integrating their communication using an interface and optimize the research process by using the necessary software; physical measurements of parameters and characteristics of models of electronic devices and systems are carried out with the help of software, for example, based on the circuit modeling program «MULTISIM». Conclusions. The installation can be effectively used in the training of electronics specialists in institutions of higher education, as well as in conducting research and tests in the field of electronics.